- Home /
- Trim Tab Systems /
- Zipwake Accessories /
- Zipwake Pro Accessories /
- DISTRIBUTION UNIT PRO WITH POWER CABLE 4 M
Shop Now
- Autopilot System
- Battery Accessories
- Battery and Tank Monitoring
- Battery Chargers
- Bilge Pump and Water Pump
- Charts
- Compasses
-
CRC/ADOS Products
- Additives-Fuel/Oil/Radiator
- Adhesives/Solvents
- Aerosol Paints
- Brake Cleaners
- Car Care
- Cleaners and Degreasers
- Corrosion Prevention Compounds
- CRC 5.56 Marine Multi Purpose Lubricants
- CRC Specialty Products
- Epoxies and Resins
- Epoxy Mortar
- Fillers
- Food Grade Range
- Gasket/Joint Compounds
- Grooming/Valet
- Lubricants/Silicone Sprays/Grease
- Outdoor Cleaners
- Sealants
- Diesel Heating and Cooking
- Electric Stabiliser Systems
- Electrical Accessories
- Enerdrive Power Systems
- Inverters
- Inverters Chargers
- Jump Starters
- Lithium Batteries
- Marine Antennas
- Marine Audio
- Marine Cameras
- Marine Instruments
- Marine Lighting
- Marine Mounting Systems
- Marine Steering Systems
- Multifunction Displays
- Network
- Radars
- Remote Contolled Spotlights
- Salt Removal
- Satelite TV Systems
- Solar Products
- Thruster Systems
- Transducers
- Trim Tab Systems
- Trolling Motors
- VHF Radios
Brands
DISTRIBUTION UNIT PRO WITH POWER CABLE 4 M
Description
Where The Power Begins
The distribution unit (DU PRO) with built-in voltage boost circuitry supplies the servo units with 36V DC power. It can accommodate up to three Series E Pro dual-servo interceptors or six single-servo Pro interceptors.
The unit is connected to the main control panel or integrator module. It is robust, waterproof, oil resistant and ignition protected for mounting in an engine room.
The power cable is included for easy connection to a battery. The distribution unit has built-in electrical protection, including its own automatic circuit breakers.
The system can be expanded with the distribution expansion unit (DU-EX PRO) to accomodate up to six Series E Pro dual-servo interceptors or any mix with single-servo pro interceptors.
Where THE Power Begins
The distribution unit (DU PRO) with built-in voltage boost circuitry supplies the servo units with 36V DC power. It can accommodate
up to three Series E Pro dual-servo interceptors or six single-servo Pro interceptors.
The unit is connected to the main control panel or integrator module. It is robust, waterproof, oil resistant and ignition protected for mounting in an engine room.
The power cable is included for easy connection to a battery. The distribution unit has built-in electrical protection, including its own automatic circuit breakers.
The system can be expanded with the distribution expansion unit (DU-EX PRO) to accomodate up to six Series E Pro dual-servo interceptors or any mix with single-servo pro interceptors.
| Model | DU PRO |
| Supply Voltage | 12 - 32 V DC |
| Power Consumption | 10 W max |
| Protection Fuse | Integrated and automatic |
|
Power Cable Length
|
Length 4 m (13 ft ft), Diameter 9 mm (0.35 in), 12 AWG |
| Operating Temperature | -20° to +85°C (-4° to +185°F) |
| Storage Temperature | -40° to +90°C (-40° to +194°F) |
| Waterproof Rating | IP67 with cables and/or protective caps mounted |
| Oil resistance | Common engine fluids |
| Compliance | CE, FCC, SAE J1171 Ignition Protected |
| Weight | 1.1 kg (2.4 lbs) including power cable |
